Jump to content


Photo

Target stand size for CJRPC?


  • Please log in to reply
14 replies to this topic

#1 Zerosignal

Zerosignal
  • LocationBrick
  • Home Range:CJRPC,Shore Shot

Posted 24 October 2012 - 01:36 PM

My dad is a member and we havn't been to general purp rifle range since they implemented the new rules with shooting crap on that range.. (We like blasting our recycling and what nots) Boring shooting at paper all day long... wanna blow the dust of the rifles to put some on paper not to mention I'm almost done putting AR together so gonna need to zero it.
Question is I know they have inside the building on the wall a spec drawing of what to build target stands to fit there holders.Anybody have a copy of that? Or the basic jist of what spacing and max wood size I can use.
Thanks

#2 tj462nj

tj462nj
  • LocationBayville
  • Home Range:CJRPC

Posted 24 October 2012 - 01:39 PM

check out the "H" stand I have on my site, perfect for CJRPC
www.tjsportingarms.com

#3 Mikeythumbs

Mikeythumbs
  • LocationJackson
  • Home Range:CJR&PC

Posted 24 October 2012 - 02:24 PM

I think you can find the info on there website under rules and regs.
Those who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety

Ben Franklin

#4 NJDrew1

NJDrew1
  • LocationEwing NJ
  • Home Range:CJRPC and Ready Aim Fire

Posted 24 October 2012 - 03:17 PM

6' is the height in order to ensure that the rounds impact the berm.

What you can do, since they have iron supports in the ground behind each of the berms is to take 2 1"x2"x6' pieces of firring strips, slide them into the iron supports and use a pony clamp to clamp them onto each of the 2 iron supports. Staple 24"x24" (same sized used in indoor range) cardboard backer on each of the 4 corners to the 1x2" strips and either staple or tape your target to the cardboard backer. A simple target support that you can easily carry, and break down for transport.

As Mikeythumbs suggested, there's drawings at the CJRPC website for a more-sophisticated take-down target stand.

Also, tj462nj recommended h-stands that keep your target stand free-standing and portable, especially for when you're using the pits.

 -- Andrew

signature_zps9b3b02a4.jpg


#5 Zerosignal

Zerosignal
  • LocationBrick
  • Home Range:CJRPC,Shore Shot

Posted 24 October 2012 - 04:09 PM

I think you can find the info on there website under rules and regs.


I don't see it, unless I'm retarded... :crazy:
Any links?

#6 Zouave

Zouave
  • LocationDelran
  • Home Range:CJRPC

Posted 24 October 2012 - 04:52 PM

Strange, the stand instructions used to be one there but I can't find it either. Here is one that I had saved on my computer, hope it helps.

GENERAL NOTES: Wood material is 1x2 common grade pine. Each frame has been designed for its specific shooting position for use on 50 and 100 yard berms. Use of this design will prevent ricochets from leaving the range. Drilling the holes for a slip-snug fit of the bolts, pins, item 6, will permit removing the legs from the frame for easy storage. By making the screws holding pc 4, leg Brace, slightly loose the legs can be slid together for ease of handling and storage. Screw fasteners permit replacement of damaged parts from near misses. Cans, Plastic bottles, etc may be suspended from strings thumb tacked from the top of the
frame brace. Cans, bottles etc may be placed on top of the lower frame brace.

PARTS:
1) 4 Pc. Top and Bottom Frame Brace. 24 inches (can be any width desired)
2) 2 Pc. Side Verticle Risers. 16 inches. Must not alter this dimension.
3) 2 Pc Legs:
Prone Position: 35 inches
Sitting Position: 52 inches
Standing Position: 69 inches
4) 1 Pc. Leg Brace. 15 inches
5) 2 Pc. Iron ground Frame Filler, any length (6 inches optimum)
6) 2 Pc. 1/4 x 2 1/2 long Bolt, dowel or other cleaves acting pin.
7) 2 Pc. Cardboard Backer, 13 x 24 inches
8) 1 Pc. Bottom Frame Brace Filler, 12 inches, centrally located

file:///C:%5CUsers%5CTONYZE%7E1%5CAppData%5CLocal%5CTemp%5Cmsohtml1%5C01%5Cclip_image002.jpg

#7 Zouave

Zouave
  • LocationDelran
  • Home Range:CJRPC

Posted 24 October 2012 - 04:54 PM

Ok, pic didn't get in there the first time, let's try that again...

http://postimage.org/image/k5b5qfy0f/

#8 Zerosignal

Zerosignal
  • LocationBrick
  • Home Range:CJRPC,Shore Shot

Posted 24 October 2012 - 05:03 PM

Thanks man..

#9 Zerosignal

Zerosignal
  • LocationBrick
  • Home Range:CJRPC,Shore Shot

Posted 24 October 2012 - 05:04 PM

TJ I still like that metal one.. Might have to get one next time I'm down towards bayville area..
Thanks

#10 Sig226GuyNJ

Sig226GuyNJ
  • Home Range:CJRPC

Posted 24 October 2012 - 08:04 PM

Since when can't we shoot things like plastic bottles and soda cans on the All Purpose Range?

#11 Zerosignal

Zerosignal
  • LocationBrick
  • Home Range:CJRPC,Shore Shot

Posted 24 October 2012 - 08:53 PM

Since when can't we shoot things like plastic bottles and soda cans on the All Purpose Range?

You can still but they have there gay ass rules with them

#12 Sig226GuyNJ

Sig226GuyNJ
  • Home Range:CJRPC

Posted 24 October 2012 - 08:57 PM

You can still but they have there gay ass rules with them


What rules are you guys talking about? The only one I'm aware of is that you must pick up what you shoot, which I would hope everyone did anyway. I looked through the rules, and couldn't find any rules on it. I'm not saying you're wrong, but what rules are you talking about?

#13 Zerosignal

Zerosignal
  • LocationBrick
  • Home Range:CJRPC,Shore Shot

Posted 24 October 2012 - 09:58 PM

What rules are you guys talking about? The only one I'm aware of is that you must pick up what you shoot, which I would hope everyone did anyway. I looked through the rules, and couldn't find any rules on it. I'm not saying you're wrong, but what rules are you talking about?

Placing... Say bottles or whatever at 50 or 100 yards on or in front of the berm..
All because of a situation I call BS on to begin with.

#14 Sig226GuyNJ

Sig226GuyNJ
  • Home Range:CJRPC

Posted 24 October 2012 - 10:16 PM

Oh, I see what you mean now. Yep, you can only place them on the back berm.

#15 RedRiverII

RedRiverII
  • LocationEast Windsor, NJ
  • Home Range:CJRPC

Posted 25 October 2012 - 05:05 PM

I bought two of those stands. 1x2's and some cardboard, g2g. Don't forget the stapler. Duct tape is bothersome.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users