MidwestPX 172 Posted January 27, 2014 I'm proud to announce that Midwest PX is now a distributor for Hiperfire triggers! We have all three triggers in stock with free shipping! Above is one of our billet lowers built with a 24C trigger. All Hiperfire triggers feature user-adjustable pull weights and the 24C also has a unique trigger shoe that allows the user greater engagement surface area between the finger and trigger. The shoe placement is also customizable. Specifications for the various triggers: Hiperfire 24 Drop-In "AR10" and "AR15" Fire-Control High Performance, Service Rifle, Trigger Upgrade Match Quality Trigger Action and Hammer Fall Functions like the Stock, Semi-Auto "AR15" Fire-Control For Standard Lower Receivers Using Small Pins of 0.154-inch Diameter Uses Stock "AR" Trigger and Semiautomatic Disconnector Springs Uses Proprietary Trigger Hammer and Disconnector Parts Uses a Proprietary Toggle-Over-Center Spring System User-Set Trigger Weights Between 2 and 4 lbs. Smooth/Short Pre-Travel, Clean Hammer Release, Fast Reset 25% to 50% Faster Hammer Lock-Up Heat-Treated Alloy Steels Installs without Removal of the Safety Selector Installs without Modification to the Lower Receiver US Pat. No. 8,572,880, Others Pending Made Entirely in the USA by Americans Hiperfire 24C (Competition) Drop-In "AR10" and "AR15" Fire-Control Straight Trigger with the HIPERSHOE™ Adjustable Finger Pad For Competitive 3-Gun, LE-MIL Tactical Interdiction, Long-Range Hunting Smooth/Shorter Pre-Travel for On-Demand Performance Compared to the 24 Clean Hammer Release, Faster Reset Compared to the 24 Match Quality Trigger Action and Hammer Fall Functions like the Stock, Semi-Auto "AR15" Fire-Control For Standard Lower Receivers Using Small Pins of 0.154-inch Diameter Uses Stock "AR" Trigger and Semiautomatic Disconnector Springs Uses Proprietary Trigger Hammer and Disconnector Parts Uses a Proprietary Toggle-Over-Center Spring System User-Set Trigger Weights: Light, Medium-Light, Medium Smooth/Shorter Pre-Travel Compared to the 24 Clean Hammer Release, Fast Reset 25% to 50% Faster Hammer Lock-Up Heat-Treated Alloy Steel Installs without Removal of the Safety Selector Installs without Modification to the Lower Receiver US Pat. No. 8,572,880, Others Pending Made Entirely in the USA by Americans Hiperfire 24E (Elite) Drop-In "AR10" and "AR15" Fire-Control For Designated Marksmen, LE-MIL Tactical Interdiction, Long-Range Hunting Smooth/Shorter Pre-Travel for On-Demand Performance Compared to the 24 Clean Hammer Release, Faster Reset Compared to the 24 Match Quality Trigger Action and Hammer Fall Functions like the Stock, Semi-Auto "AR15" Fire-Control For Standard Lower Receivers Using Small Pins of 0.154-inch Diameter Uses Stock "AR" Trigger and Semiautomatic Disconnector Springs Uses Proprietary Trigger Hammer and Disconnector Parts Uses a Proprietary Toggle-Over-Center Spring System User-Set Trigger Weights: Light, Medium-Light, Medium Smooth/Shorter Pre-Travel Compared to the 24 Clean Hammer Release, Fast Reset 25% to 50% Faster Hammer Lock-Up Heat-Treated Alloy Steel Installs without Removal of the Safety Selector Installs without Modification to the Lower Receiver US Pat. No. 8,572,880, Others Pending Made Entirely in the USA by Americans Quote Share this post Link to post Share on other sites
Respect2A 0 Posted January 27, 2014 I've heard great things about these triggers. Quote Share this post Link to post Share on other sites
MidwestPX 172 Posted January 27, 2014 I've heard great things about these triggers. I've been playing with a 24C and I really like being able to dial the pull weight in. Reset feels similar to a Geissele S3G with less overtravel. Just as crisp of a break if not more so too. The shoe took some getting used to but after having played with it a bit, I don't want to use the trigger without it as I feel like I have more control with it. Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted January 27, 2014 I've been wanting to upgrade the stock trigger in my AR for a while and have been between the Geissele SD-E and the Hiperfire 24E. I've been leaning towards the tried and trusted Geissele. Have any experience on these? Quote Share this post Link to post Share on other sites
MidwestPX 172 Posted January 28, 2014 I've been wanting to upgrade the stock trigger in my AR for a while and have been between the Geissele SD-E and the Hiperfire 24E. I've been leaning towards the tried and trusted Geissele. Have any experience on these? Both are good triggers. However, the SD-E is a two stage while the 24E is a single stage. Big difference right off the bat. Both have zero creep, a mark of a good trigger. The 24E can be tuned by the user to different pull weights by swapping out the provided springs. The reset on the 24E feels shorter to me. Both are geared toward precision shooting and I think the biggest factor is going to be if you want a single stage or a two stage trigger. Quote Share this post Link to post Share on other sites
Clintoon Eastwood 2 Posted January 28, 2014 These triggers are popping out everywhere. Too bad, I'm a PO' boy Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted January 29, 2014 Both are good triggers. However, the SD-E is a two stage while the 24E is a single stage. Big difference right off the bat. Both have zero creep, a mark of a good trigger. The 24E can be tuned by the user to different pull weights by swapping out the provided springs. The reset on the 24E feels shorter to me. Both are geared toward precision shooting and I think the biggest factor is going to be if you want a single stage or a two stage trigger. Thanks for the feedback. Not to detract from the point of this thread: what's the application for a single vs a two stage trigger? My understanding of the two stage was that it was intended as a combat trigger so it requires a more deliberate press. Isn't that why we keep our fingers off the trigger, though? Quote Share this post Link to post Share on other sites
MidwestPX 172 Posted January 29, 2014 Thanks for the feedback. Not to detract from the point of this thread: what's the application for a single vs a two stage trigger? My understanding of the two stage was that it was intended as a combat trigger so it requires a more deliberate press. Isn't that why we keep our fingers off the trigger, though? Two stage is beneficial if you want to "prep" your trigger rather than pull straight through. I used to be a two-stage only shooter but have since transitioned to single stage triggers. I find that a single stage without creep and a super crisp break is a better general purpose trigger that doesn't sacrifice precision once you learn the trigger. Quote Share this post Link to post Share on other sites
Respect2A 0 Posted January 29, 2014 I find two stage to be more beneficial to bench rest shooting than anything else. High power matches too. Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted January 29, 2014 Two stage is beneficial if you want to "prep" your trigger rather than pull straight through. I used to be a two-stage only shooter but have since transitioned to single stage triggers. I find that a single stage without creep and a super crisp break is a better general purpose trigger that doesn't sacrifice precision once you learn the trigger. I'm still very much a novice to rifle platforms, so I have the odd advantage of not being used to one style or the other. I feel like the single stage trigger makes more sense to me and how my brain works. I still have time to decide. Thanks for the help. Quote Share this post Link to post Share on other sites
MidwestPX 172 Posted January 29, 2014 I'm still very much a novice to rifle platforms, so I have the odd advantage of not being used to one style or the other. I feel like the single stage trigger makes more sense to me and how my brain works. I still have time to decide. Thanks for the help. I'd say it's easier to transition from a single stage to a two stage than vice versa. When you go from a two stage to a single stage, you have to recondition yourself to no longer expect that stop (end of first stage, beginning of second stage) and pull through it. Quote Share this post Link to post Share on other sites