checko 180 Posted September 11, 2014 I would have preferred if they left my trigger alone. 8.5lb trigger in a compact polymer gun. So much fail At least its not 12# Sent from my XT1080 using Tapatalk Quote Share this post Link to post Share on other sites
EWC88 24 Posted September 11, 2014 Has anyone ever shoot a sig P320? Quote Share this post Link to post Share on other sites
diamondd817 826 Posted September 11, 2014 Glock rates the factory stock trigger at 5.5lbs, the NY1 spring is said to make it an 8lb trigger. I have a couple Glocks and a Lyman digital scale to measure pull weight. I find the average stock Glock trigger to be around 7.5lbs. With the NY1 spring installed it bumps it up to about 10lbs. Just an FYI. Quote Share this post Link to post Share on other sites
acaixguard 37 Posted September 11, 2014 There is just something wrong about trying to place the SIG P320 in the same category as the G19. Without a doubt, the G19 is the winner. One of the best carry pistols you can get. Quote Share this post Link to post Share on other sites
EWC88 24 Posted September 13, 2014 What are people's thoughts on the G23? Same size as 19 but in .40 cal, thought about maybe doing that so I have one 9mm (PPQ) and one .40 (G23) to start out with. Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted September 13, 2014 Get one or the other and then get the other caliber slide. 2 guns one permit Quote Share this post Link to post Share on other sites
EWC88 24 Posted September 13, 2014 BLF- recommend any company to get the conversion barrel from? I did a quick google and seen a lot of people saying Lonewolf, but didn't know if you have done this and recommend a certain one. Quote Share this post Link to post Share on other sites
NYMetsFan86 9 Posted September 13, 2014 KKM Precision is supposed to be top notch when it comes to match barrels Quote Share this post Link to post Share on other sites
scorched 0 Posted September 13, 2014 I have a lone wolf 9mm barrel for my 23, as well as a ton of 19 mags. Functions well, brass ejects straight back sometimes, and shoots a touch low with the conversion barrel though Quote Share this post Link to post Share on other sites
BlueLineFish 615 Posted September 13, 2014 I meant just get a complete slide assembly in the other caliber Quote Share this post Link to post Share on other sites
svt3183 14 Posted September 13, 2014 For poly in your case I'd get a PPQ. If I wanted to blow extra $ I'd get a P30. If I wanted to cheap i'd get a 2022 - awesome, often overlooked guns. I've shot a G19 multiple times and it's fine but there's many better options IMO. Quote Share this post Link to post Share on other sites
Parker 213 Posted September 14, 2014 I meant just get a complete slide assembly in the other caliber Sadly, there are some poor souls out there who fell in love with Glock's at an early age who own the early G19's with the single-pin (2-pin frame) with a single pin through the locking block. It is not recommended they be adapted to take on the .40S&W conversion. Quote Share this post Link to post Share on other sites
Russell 3 Posted September 14, 2014 Sadly, there are some poor souls out there who fell in love with Glock's at an early age who own the early G19's with the single-pin (2-pin frame) with a single pin through the locking block. It is not recommended they be adapted to take on the .40S&W conversion. Sounds like a pretty good excuse for buying another Glock. You can never have too many! Quote Share this post Link to post Share on other sites
High Velocity 0 Posted September 14, 2014 Sadly, there are some poor souls out there who fell in love with Glock's at an early age who own the early G19's with the single-pin (2-pin frame) with a single pin through the locking block. It is not recommended they be adapted to take on the .40S&W conversion. BTW Nice "2-pin" you have there. Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted September 14, 2014 If you know you're going to get a PPQ, don't bother with a G19. Diversify with a different caliber or type of gun. Quote Share this post Link to post Share on other sites
PD2K 115 Posted September 20, 2014 Honestly hard to argue against the Glock 19 G4 as one of the best all purpose handguns on the market. I have it and love it. Rent one at the range. Shoot it and decide for yourself before you buy. Quote Share this post Link to post Share on other sites
SgtToadette 59 Posted September 20, 2014 Honestly hard to argue against the Glock 19 G4 as one of the best all purpose handguns on the market. I have it and love it. Rent one at the range. Shoot it and decide for yourself before you buy. I agree that it's hard to argue against a compact, striker-fired 9mm. But there's a ton of other handguns in the same market segment like the PPQ, XD, M&P9, Steyrs, and now the VP9. Any of those will be a decent choice. Quote Share this post Link to post Share on other sites
PD2K 115 Posted September 20, 2014 I agree that it's hard to argue against a compact, striker-fired 9mm. But there's a ton of other handguns in the same market segment like the PPQ, XD, M&P9, Steyrs, and now the VP9. Any of those will be a decent choice. Absolutely...any of those are fine choices. That's why everyone should test drive before you buy Quote Share this post Link to post Share on other sites
rauchman 3 Posted September 24, 2014 I have a Gen4 G23 and have shot my buddy's Gen2 and Gen3 extensively. I think the Gen4's are a great evolution of the platform, especially in .40. Having said that, it always leaves me uneasy that for any .40 Glock I've fired, it leaves a bulge on the cartridge case due to the chamber not being fully supported. Between the G19 and G23, I prefer the G19. Regarding the G19, it is arguably the most efficient 9mm package in terms of size, weight and # of rounds. It is sculpted as sexy as a PPQ (have one of those too), no, it's not. However, for me, the G19 tracks better and can be shot almost as accurately. Rather I should say, the PPQ is easier to be accurate with when taking slow paced deliberate very focused aim. The G19 shoots better when shot at a quicker pace. The G19 has a trigger, that while far from as nice feeling as a lot of pistols, works very well when shooting with a more combat shooting mind set. Having said that, the G19 trigger took me quite some time to get comfortable with. I also like that the trigger is not fully cocked while in battery, as compared to an M&P / PPQ, etc. Parts availability and cost are about as good as it gets. Mags are $25 or less. All the sight companies make sights for Glocks. If you're going to have 1 pistol to do everything with, there are not many better choices than the G19. Quote Share this post Link to post Share on other sites
rauchman 3 Posted September 24, 2014 The classic Gen 2 G19. Very cool. That was my 1st G19 and it's still my fav. I dry fired that sucker so much without snap caps, I shattered the breach area from the firing pin slamming into back of the breach area. Glock was kind enough to give me a Gen3 slide for the pistol. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted September 28, 2014 Do the gen 4 come with adjustable sights. G19 are becoming the 10/22 of handguns Quote Share this post Link to post Share on other sites
High Velocity 0 Posted September 28, 2014 Do the gen 4 come with adjustable sights. G19 are becoming the 10/22 of handguns Nope. Fixed sights on the G19. The longer barrel / slide models (G34, 35 etc) come with an adjustable rear sight. Quote Share this post Link to post Share on other sites
PD2K 115 Posted September 30, 2014 BLF- recommend any company to get the conversion barrel from? I did a quick google and seen a lot of people saying Lonewolf, but didn't know if you have done this and recommend a certain one. Lone Wolf is excellent - they sell them on eBay with free shipping. Quote Share this post Link to post Share on other sites