Texas Shooter 35 Posted October 12, 2014 I'm having trouble removing the firing pin retainer on my Norinco SKS (cross style bayonet). The darn thing won't come out with a punch. I tried a few light taps with a hammer to no avail. Any suggestions on how to remove it? Quote Share this post Link to post Share on other sites
intercooler 41 Posted October 12, 2014 don't be bashful use a 1/8 punch and drive it out...they are in there very well. make sure to clean the pin and the hole really well as rust likes to build up in there...which makes the gun dangerous (full auto slam fires) Quote Share this post Link to post Share on other sites
siderman 1,137 Posted October 12, 2014 back when I almost picked up a SKS i was considering this fix for the floating pin- http://www.murraysguns.com/sksown.htm and they are from Texas Quote Share this post Link to post Share on other sites
Old School 611 Posted October 12, 2014 I'm having trouble removing the firing pin retainer on my Norinco SKS (cross style bayonet). The darn thing won't come out with a punch. I tried a few light taps with a hammer to no avail. Any suggestions on how to remove it? Use a punch as close to the full diameter of the pin as possible so, you don't peen the edges of the pin. Get a 2X4 and drill a relief hole for the pin to enter. And go to town on it. You may want to soak the bolt in a penetrating solvent first. I agree some are tough. And if you don't have everything clean inside it WILL slam fire. I see you shoot at CR. Let me know and I'll bring the stuff up there. Quote Share this post Link to post Share on other sites
Texas Shooter 35 Posted October 12, 2014 Thanks guys! The penetrating oil and 2x4 did the trick. I also put a bit more elbow into it. They're built tough. I'll be at CR around 12:30 trying it out! Quote Share this post Link to post Share on other sites